How to make a custom pet collar

Written by: admin@makezilla

Picture of How to make a custom pet collar001.JPG016.JPG

 

The video above shows how to make the collar. If you need more explanation the next few steps should clarify any questions.

In both the video and the picture the materials you need are shown. The actual "collar" material used is webbing, you can get it at any climbing store, such as REI, I have even seen webbing at hardware stores. The other materials are shown I just don't know what to call them even though i can guess we've all seen them. I retrieved all these materials off of an old backpack except for the metal ring, that was a lucky find. You can also get these materials at an outdoor or hardware store.

Step 1: Things to consider

Picture of Things to consider

I suggest getting a piece of webbing about double the circumference of your pets neck.
Another thing to consider is having a candle at your side so you can burn the webbing back together after cutting it.
Now, we can begin.

Step 2: Assembling the collar

018.JPG020.JPG

Put the buckle on as seen below.

Next, Put one end of the clip on below the buckle then put the metal ring on.
Once this step is completed re-thread the webbing through the buckle you put on first.

Pictures to these steps are seen below.
 

Step 3: Assembling the collar

Picture of Assembling the collar022.JPG023.JPG

On the other side of the collar, thread the second part of the clip on, as seen below

Step 4: Final step

027.JPG030.JPG031.JPG

Pull the webbing through until it reaches the buckle like the first picture below.
Finally, re-thread the webbing through the buckle, and... you're done!

Feel free to ask questions if you need clarification on anything.

If you liked this instructable please VOTE for me in the "pets" challenge. Thanks! :)

Leave a Reply