Charge your phone with DC Motor

Written by: roboguru

Charge your phone with DC Motor when there is no current, emergencies, no charger...

Follow the video for visual step by step procedures

 

Step 1: Have with you

Picture of Have with youScreen Shot 2016-01-04 at 12.05.24 PM.jpg

  1. 200-300 rpm DC motor
  2. Connecting wires
  3. mobile car charger
  4. Wheel
  5. USB cable

Step 2: WHEEL IT

Picture of WHEEL ITScreen Shot 2016-01-04 at 12.05.43 PM.jpg

Screw the wheel using screw drivers so that it will be easy for you to generate current with your hand

Step 3: TERMINALS

Picture of TERMINALS

Bottom terminal(button type) of car mobile charger is positive while side(ring type) terminal is negative.

use wires for extending them.

Step 4: CHARGE

Picture of CHARGE

Rotate the wheel in clockwise direction. Make sure that red is positive and black is negative else you may damage your car charger. There it is you have made it !

Step 5: Want to have fun

Picture of Want to have funScreen Shot 2016-01-04 at 12.07.11 PM.jpg

Take 2 or 4 motors and make a bot using chassis. image shows only one side motors.

One side motors:

USE PARALLEL CONFIGURATION M1//M2

Two side motors(car/bot type):

USE SERIES PARALLEL CONFIGURATION ie [M1//M2]--[M3//M4]. In word they can be explained as one motor is parallel to another while one side (pair of motor) is in series configuration with other side. If you collapse wiring then you will loose energy at the same time you will damage your car charger. Instructions are clear , YOU CAN DO IT AND HAVE FUN.

Step 6: HAVE FUN

Picture of HAVE FUNScreen Shot 2016-01-04 at 12.06.16 PM.jpg

Keep this in your mind : More the motor you use then faster your phone gets charged!, Even if you rotate at rated rpm it won't exceed more than its rated voltage. It is recommended to use 200 rpm DC Motor

DRIVE YOUR BOT OR ROTATE THE WHEELZ TO CHARGE YOUR PHONE !!

YOU CAN ALSO CHARGE YOUR SMART/FEATURE PHONE, iPOD, iPHONE, iPAD, TAB!!

THANK YOU

Leave a Reply