Using a Motor with Linkit ONE

Written by: admin@makezilla

Picture of Using a Motor with Linkit ONE

Motors + Linkit ONE

Step 1: Materials

Picture of MaterialsDSCF0429.JPGDSCF0427.JPGDSCF0426.JPG

Motor (you do not have to buy one, i got this from an old RC Car)

Wire

Lithium ion Battery

Linkit ONE

Step 2: Connections

Picture of Connections

Put the wires in the 4th and 6th holes at the top of the Linkit ONE. Plug in the the ion battery at the top right of your board as shown in the picture

Step 3: Connect the Motor

Picture of Connect the Motor

Now just simply plug the wires into the motor. Use the picture as reference

Step 4: Possible Uses

With the motor there are a lot of things you can do. This particular motor rotates , so some uses could be

 

  • Hand held Fan
  • Wheel motor
  • Spinning Blade ( wouldn't cut to many things)
  • Props
  • And More!

Step 5: Finish

Now you have a running motor that you can use for many things

Leave a Reply